0 varerThe speed controllers from DOLD especially serve the simple speed controlling of pumps and fans to adjust the load on the drive machine. In comparison to frequency converters, they provide with substantially few EMC problems because no shielded wires are necessary. Possible applications are the speed controlling of exhaust fans for large kitchens.
 | Phase Controller with analog control 4-20 mA; 0-10 V IN 9017 • Phase controller for resistive and motor load • for permanent power up to 300 W • Interference suppression limit value class B • LED indication • Devices available in 3 versions: IN 9017/100: with current interface 4 ... 20 mA and broken wire detection IN 9017/200: with voltage interface 0 ... 10 V IN 9017/211: with voltage interface 0 ... 10 V, Umin adjustable, control input for max. output current • Width: 53 mm | Download datablad |
 | Speed Controller SX 9240.01 • According to IEC/EN 60 947-1, IEC/EN 60 947-4-2 • For speed control of 3-phase asynchronous motors up to 5.5 kW • Speed adjustment by potentiometer on the front • Additional galvanic separated control input for external speed control 0 ... 10 V • Umin and Umax setting accessable behind screw cover • Large motor voltage range • Integrated temperature monitoring • Fullfills the EMC requirement according to IEC/EN 61 000-6-4 limit class B, therefore screened wires are not necessary between motor and controller • 2 changeover monitoring contacts • LED indicators for alarm and status • Connection for thermistor to monitor temperature • 100 mm and 122 mm width | Download datablad |
 | Speed Controller SX 9240.03 • According to IEC/EN 60 947-1, IEC/EN 60 947-4-2 • For speed control of 3-phase asynchronous motors up to 5.5 kW • Speed adjustment by potentiometer on the front • Additional galvanic separated control input for external speed control 0 ... 10 V, 0 ... 20 mA, 4 ... 20 mA • Umin and Umax setting accessable behind screw cover • Large motor voltage range • Integrated temperature monitoring • Fullfills the EMC requirement according to IEC/EN 61 000-6-4 limit class B, therefore screened wires are not necessary between motor and controller • 2 changeover monitoring contacts • LED indicators for alarm and status • Connection for thermistor to monitor temperature • 100 mm, 122 mm and 168 mm width | Download datablad |
